Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Colorado Springs?
Spring replacement in Colorado Springs typically costs $180 to $340 for one spring. Because most doors use a matched pair, and the pair is usually replaced together, a full two-spring job usually runs about twice that. The written estimate you get before any work begins sets the final price, and it’s free.
That range covers the spring itself, the labor to wind and balance a torsion system safely, and the tension check afterward. What moves you up or down inside it is the type of spring, whether both are being swapped, and how much adjacent hardware has to come off to get at the springs on your specific door.
Key Takeaways
- One spring: $180 – $340. A matched pair usually costs about double, since both are replaced at once.
- Cables and rollers are separate line items if they’re worn out too.
- Brand-matched parts matter: universal-fit springs wear faster and can affect warranty coverage on Clopay, Amarr, Wayne Dalton and Raynor doors.
- Free estimates. Call (855) 473-9096. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually land in the Colorado Springs market. These are typical estimated ranges, not quotes for your specific door. A technician confirms the exact figure on site before touching anything.
| Line item | Typical estimated range |
|---|---|
| Spring repair or replacement (one spring) | $180 – $340 |
| Matched pair of springs (about double the single-spring range) | roughly twice the above |
| Cable repair (often done alongside springs) | $130 – $250 |
| Roller replacement (worn rollers strain new springs) | $110 – $220 |
| Track realignment (bent track throws spring tension off) | $120 – $240 |
| Panel replacement (if a spring failure dropped the door) | $250 – $500 |
| Opener repair (if the opener was strained by a heavy door) | $120 – $320 |
| Full garage door repair (combined work) | $150 – $600 |
The single biggest variable is whether you have one spring or two. A torsion system with two springs is designed so that if one breaks, the second takes the load. Most technicians working in Colorado Springs will tell you that replacing one spring on a two-spring door just means the second one fails soon after, since both accumulated the same number of cycles. That’s why the pair is normally quoted together.
The second variable is what else gets replaced while the door is open. A spring that fails violently can whip a cable loose or bend a track. If a technician finds a frayed cable or a roller with a frozen bearing, doing that work at the same time costs less than another visit later. The written estimate lays out each line so you can decide what to do now and what can wait.
What Affects Spring Replacement Pricing in Colorado Springs
- Colorado Springs temperature swings. The city sits where cold nights and fast warm-ups are normal, and steel springs cycle through expansion and contraction constantly through the year. That thermal cycling, on top of the door’s daily open-and-close, is hard on metal, which is one reason spring failure isn’t rare in neighborhoods like Briargate, Powers and the older streets near Old Colorado City.
- Spring type. Standard torsion springs cost less than high-cycle springs rated for more open-and-close cycles. Torsion springs and extension springs aren’t interchangeable, and older doors with extension springs sometimes need hardware changes to make the swap cleanly.
- Door weight and size. A double-wide insulated door takes heavier springs than a single-car door. Heavier doors mean a wider set of springs and more careful balancing.
- Whether it’s a pair. Two springs means roughly double the single-spring cost. Some technicians quote the pair as one line; others break it out. Either way, the total reflects two springs.
- Condition of cables, rollers and track. Springs only work correctly when everything else is sound. If a cable is frayed or a track is bent, the price climbs because the system won’t hold tension otherwise.
- Brand and part availability. Doors from Clopay, Amarr, Wayne Dalton and Raynor use model-specific springs and hardware. Getting the right part for your model matters more than getting any part that fits, and it protects manufacturer warranties.
- Access. A low-clearance ceiling or a tight garage bay can make winding a torsion spring slower and more careful.
Why Springs Fail So Often Here
Colorado Springs sits at higher elevation than most of the country, and the air here is drier and moves through larger temperature swings between day and night. Metal responds to that. A garage door spring is a coil of steel under constant tension, and every temperature change makes it expand and contract a fraction. Multiply that by a few thousand times a year, add the door’s daily open-and-close cycles, and you have the reason springs fail on a schedule rather than at random.
Most garage doors are used twice a day or more. Over a typical spring’s rated life, that’s thousands of cycles. When one finally goes, it usually announces itself with a loud bang from the garage, and the door won’t lift. Sometimes the failure is gradual: the door starts feeling heavier, the opener strains, and the door drifts down after you close it. That heavy feeling is the warning sign. Springs under tension are dangerous to touch, and neither a worn spring nor a broken one should be handled without the right winding bars and training. We don’t give step-by-step instructions for that reason. A trained technician handles it.
What we look at on a spring call is the full system, not just the broken piece. A spring replacement on a door with a bent track or a frayed cable won’t last. Diagnosing the whole door – panels, cables, rollers, opener – in one visit saves a second call. That’s the same approach we take to Westbrook Garage Door Repair work on any door, whatever the brand.
Repair or Replace: Which Makes Sense on a Spring Job
A spring replacement is almost always the right call if the door panels, tracks and opener are sound. Springs are wear items, like brake pads. Replacing them restores the door. Replacing an entire door because a spring broke doesn’t make sense. The numbers say the same thing: a spring job at $180 – $340 is far below a new door installation, which typically runs $700 to $2,200 in Colorado Springs.
Where a different conversation starts is when a spring failure has taken other things with it. If the door dropped when the spring snapped and bent a panel or two, or if the opener’s drive gear stripped trying to lift a heavy door, the total repair can approach the cost of a new door. A technician will tell you honestly which side of that line you’re on after seeing the door. New or replacement doors come from brands sold through professional channels – Clopay, Amarr, Wayne Dalton, Raynor – not big-box stores, and that matters for warranty and fit.
How to Save on Spring Replacement
Springs aren’t the place to chase the lowest bid. A cheap universal spring that doesn’t match your door’s weight and cycle rating will wear out faster, and re-doing the job costs more than doing it right once. That said, there are real ways to keep the total down:
- Get a written estimate first. It should itemize the spring, labor, and any extra parts. Free estimates are standard on this work. Call (855) 473-9096.
- Replace the pair together. If you have two springs and one broke, replacing both at once costs about one visit’s labor instead of two.
- Fix worn cables and rollers at the same time. Bundling wear items into one visit is cheaper than scheduling separate trips.
- Skip the big-box spring kit. Springs are matched to door weight and track height. A kit that’s “close enough” doesn’t hold tension long and can strain the opener.
- Ask about cycle rating. A standard spring is fine for a door used a few times a day. If your household opens the door ten times a day, a higher-cycle spring costs more upfront but lasts longer.
- Keep the opener out of it. Don’t run a heavy door on a strained opener hoping it’ll lift. That turns a spring bill into a spring-plus-opener bill.
If you’re comparing estimates, compare the part, not just the total. A quote that lists a brand-matched spring for your Clopay or Amarr door is a different job from one that doesn’t name the part at all.
When to Call for Spring Help
If you heard a sharp bang from the garage and the door won’t lift, the spring has failed. Don’t force it. Call us. A door with a broken spring is heavy, and pulling on the opener’s release cord or trying to lift the door by hand risks dropping it on a person or a car.
Other signs that point to a spring problem:
- The door lifts a few inches and stops, or feels much heavier than usual.
- The opener runs but the door doesn’t move, or moves with a grinding noise.
- The door drifts back down after you close it, or hangs crooked.
- A gap opens between the coils of a torsion spring above the door.
- A loud snap from the garage at any hour. The spring broke; it just waited to tell you.
If you’re in the middle of a call with us about springs, our phone line answers 24 hours a day. A call coming in outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. If your door fails on a Saturday, call and we’ll get you on the schedule for Sunday.
Frequently Asked Questions About Spring Replacement Cost
How much does it cost to replace a garage door spring in Colorado Springs?
Spring replacement typically costs $180 to $340 for one spring in Colorado Springs. A matched pair costs about twice that because both are normally replaced together. The written estimate sets the final price, and estimates are free. Call (855) 473-9096 for an exact quote.
Is it cheaper to replace one spring or both?
Replacing one spring costs about half a pair, but it usually isn’t cheaper over time. If one spring broke, the other has the same cycles on it and is likely to fail soon. Doing both in one visit costs about two springs plus one labor charge, versus two separate visits. Call (855) 473-9096 and we’ll quote both options.
Can you fix a broken spring the same day?
Often, yes. Spring replacement is a common same-day repair. Call (855) 473-9096. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, but a Saturday call gets booked into the next opening on Sunday.
Does my homeowner’s insurance cover a broken spring?
Usually not. A broken spring is wear and tear, and most homeowner’s policies exclude wear items. Insurance is more likely to come into play if a spring failure caused damage to something else, like a car or the interior of the garage. We can work with your insurer if that happens. For the spring itself, expect to pay the estimate out of pocket.
Are garage door springs dangerous to replace yourself?
Yes. Torsion springs are under extreme tension, and improper handling can cause serious injury. We don’t recommend DIY spring work and won’t give step-by-step instructions for it. The safe move is to leave the door alone and call a trained technician. Call (855) 473-9096 for a free estimate.
How long do replacement springs last?
That depends on the spring’s cycle rating and how often the door is used. A standard spring lasts thousands of open-and-close cycles; a higher-cycle spring lasts longer. A household that opens the door a few times a day gets years from a new spring. One that runs it ten or more times a day wears it out faster, which is why we ask how the door is used before quoting a spring.
Why did my spring break in winter?
Cold makes steel more brittle. Colorado Springs’ long cold stretches are hard on springs, and many fail on the first cold morning after a warm spell. It’s a temperature effect, not a defect. The replacement spring is chosen to handle the local climate, which is one reason brand-matched parts matter here.
Will a new spring fix a noisy door?
Not by itself. Springs control the door’s weight, not its sound. Squeaks and grinding usually come from worn rollers or a dry track, and those are separate line items. If the door is noisy before the springs fail, it’s worth mentioning it when you call so a technician looks at the whole system.
Why Choose Westbrook Garage Door Repair for Spring Work in Colorado Springs?
Springs don’t fail on a single brand. They fail on every door, and the correct replacement depends on the door’s weight, track height and model. We work on doors from Clopay, Amarr, Wayne Dalton and Raynor, and openers from LiftMaster, Chamberlain, Genie and Craftsman. That means when your spring job also touches a strained opener or a worn drive gear, we diagnose the whole system rather than guessing at one piece.
Our technicians have up to 11 years of experience, and we handle repair, opener repair and installation as one service, so a spring job doesn’t send you looking for a second contractor when the opener turns out to be damaged. If you’re upgrading a connected-home setup, we know the LiftMaster and Chamberlain myQ ecosystem and Genie’s Aladdin Connect, so a new opener integrates with what you already have.
We don’t claim the lowest price in town. We do promise a written estimate before work begins, brand-matched parts, and the whole door system looked at in one visit, from Colorado Springs to the surrounding neighborhoods. Warranty-safe work matters: a universal-fit spring on a Clopay or Wayne Dalton door can put the manufacturer’s coverage in question.
Get a Free Spring Replacement Estimate
If your door won’t lift, the spring is the first place a technician will look. Call us at (855) 473-9096 for a free estimate. We’re straightforward about what your door needs and what it can wait on. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Whether you’re facing a snapped spring on a single-car door, a matched pair that’s overdue on a double-wide, or a spring failure that took a cable with it, the call is the same. You’ll know the price before any wrench comes out.
Written by the team at Westbrook Garage Door Repair.
Pricing reflects the Colorado Springs market as of 2026. Westbrook Garage Door Repair offers free estimates – call (855) 473-9096.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Hector Herrera"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Craig Kowalski"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Adam Rhodes